Logo Search packages:      
Sourcecode: u-boot-omap4 version File versions  Download package

e1000.h

/*******************************************************************************


  Copyright(c) 1999 - 2002 Intel Corporation. All rights reserved.

  This program is free software; you can redistribute it and/or modify it
  under the terms of the GNU General Public License as published by the Free
  Software Foundation; either version 2 of the License, or (at your option)
  any later version.

  This program is distributed in the hope that it will be useful, but WITHOUT
  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  more details.

  You should have received a copy of the GNU General Public License along with
  this program; if not, write to the Free Software Foundation, Inc., 59
  Temple Place - Suite 330, Boston, MA  02111-1307, USA.

  The full GNU General Public License is included in this distribution in the
  file called LICENSE.

  Contact Information:
  Linux NICS <linux.nics@intel.com>
  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

*******************************************************************************/

/* e1000_hw.h
 * Structures, enums, and macros for the MAC
 */

#ifndef _E1000_HW_H_
#define _E1000_HW_H_

#include <common.h>
#include <malloc.h>
#include <net.h>
#include <asm/io.h>
#include <pci.h>

#define E1000_ERR(args...) printf("e1000: " args)

#ifdef E1000_DEBUG
#define E1000_DBG(args...)    printf("e1000: " args)
#define DEBUGOUT(fmt,args...) printf(fmt ,##args)
#define DEBUGFUNC()        printf("%s\n", __FUNCTION__);
#else
#define E1000_DBG(args...)
#define DEBUGFUNC()
#define DEBUGOUT(fmt,args...)
#endif

/* Forward declarations of structures used by the shared code */
struct e1000_hw;
struct e1000_hw_stats;

typedef enum {
      FALSE = 0,
      TRUE = 1
} boolean_t;

/* Enumerated types specific to the e1000 hardware */
/* Media Access Controlers */
typedef enum {
      e1000_undefined = 0,
      e1000_82542_rev2_0,
      e1000_82542_rev2_1,
      e1000_82543,
      e1000_82544,
      e1000_82540,
      e1000_82545,
      e1000_82546,
      e1000_num_macs
} e1000_mac_type;

/* Media Types */
typedef enum {
      e1000_media_type_copper = 0,
      e1000_media_type_fiber = 1,
      e1000_num_media_types
} e1000_media_type;

typedef enum {
      e1000_10_half = 0,
      e1000_10_full = 1,
      e1000_100_half = 2,
      e1000_100_full = 3
} e1000_speed_duplex_type;

typedef enum {
      e1000_lan_a = 0,
      e1000_lan_b = 1
} e1000_lan_loc;

/* Flow Control Settings */
typedef enum {
      e1000_fc_none = 0,
      e1000_fc_rx_pause = 1,
      e1000_fc_tx_pause = 2,
      e1000_fc_full = 3,
      e1000_fc_default = 0xFF
} e1000_fc_type;

/* PCI bus types */
typedef enum {
      e1000_bus_type_unknown = 0,
      e1000_bus_type_pci,
      e1000_bus_type_pcix
} e1000_bus_type;

/* PCI bus speeds */
typedef enum {
      e1000_bus_speed_unknown = 0,
      e1000_bus_speed_33,
      e1000_bus_speed_66,
      e1000_bus_speed_100,
      e1000_bus_speed_133,
      e1000_bus_speed_reserved
} e1000_bus_speed;

/* PCI bus widths */
typedef enum {
      e1000_bus_width_unknown = 0,
      e1000_bus_width_32,
      e1000_bus_width_64
} e1000_bus_width;

/* PHY status info structure and supporting enums */
typedef enum {
      e1000_cable_length_50 = 0,
      e1000_cable_length_50_80,
      e1000_cable_length_80_110,
      e1000_cable_length_110_140,
      e1000_cable_length_140,
      e1000_cable_length_undefined = 0xFF
} e1000_cable_length;

typedef enum {
      e1000_10bt_ext_dist_enable_normal = 0,
      e1000_10bt_ext_dist_enable_lower,
      e1000_10bt_ext_dist_enable_undefined = 0xFF
} e1000_10bt_ext_dist_enable;

typedef enum {
      e1000_rev_polarity_normal = 0,
      e1000_rev_polarity_reversed,
      e1000_rev_polarity_undefined = 0xFF
} e1000_rev_polarity;

typedef enum {
      e1000_polarity_reversal_enabled = 0,
      e1000_polarity_reversal_disabled,
      e1000_polarity_reversal_undefined = 0xFF
} e1000_polarity_reversal;

typedef enum {
      e1000_auto_x_mode_manual_mdi = 0,
      e1000_auto_x_mode_manual_mdix,
      e1000_auto_x_mode_auto1,
      e1000_auto_x_mode_auto2,
      e1000_auto_x_mode_undefined = 0xFF
} e1000_auto_x_mode;

typedef enum {
      e1000_1000t_rx_status_not_ok = 0,
      e1000_1000t_rx_status_ok,
      e1000_1000t_rx_status_undefined = 0xFF
} e1000_1000t_rx_status;

struct e1000_phy_info {
      e1000_cable_length cable_length;
      e1000_10bt_ext_dist_enable extended_10bt_distance;
      e1000_rev_polarity cable_polarity;
      e1000_polarity_reversal polarity_correction;
      e1000_auto_x_mode mdix_mode;
      e1000_1000t_rx_status local_rx;
      e1000_1000t_rx_status remote_rx;
};

struct e1000_phy_stats {
      uint32_t idle_errors;
      uint32_t receive_errors;
};

/* Error Codes */
#define E1000_SUCCESS      0
#define E1000_ERR_EEPROM   1
#define E1000_ERR_PHY      2
#define E1000_ERR_CONFIG   3
#define E1000_ERR_PARAM    4
#define E1000_ERR_MAC_TYPE 5
#define E1000_ERR_NOLINK   6
#define E1000_ERR_TIMEOUT  7

/* PCI Device IDs */
#define E1000_DEV_ID_82542          0x1000
#define E1000_DEV_ID_82543GC_FIBER  0x1001
#define E1000_DEV_ID_82543GC_COPPER 0x1004
#define E1000_DEV_ID_82544EI_COPPER 0x1008
#define E1000_DEV_ID_82544EI_FIBER  0x1009
#define E1000_DEV_ID_82544GC_COPPER 0x100C
#define E1000_DEV_ID_82544GC_LOM    0x100D
#define E1000_DEV_ID_82540EM        0x100E
#define E1000_DEV_ID_82540EM_LOM    0x1015
#define E1000_DEV_ID_82545EM_COPPER 0x100F
#define E1000_DEV_ID_82545EM_FIBER  0x1011
#define E1000_DEV_ID_82546EB_COPPER 0x1010
#define E1000_DEV_ID_82546EB_FIBER  0x1012
#define NUM_DEV_IDS 13

#define NODE_ADDRESS_SIZE 6
#define ETH_LENGTH_OF_ADDRESS 6

/* MAC decode size is 128K - This is the size of BAR0 */
#define MAC_DECODE_SIZE (128 * 1024)

#define E1000_82542_2_0_REV_ID 2
#define E1000_82542_2_1_REV_ID 3

#define SPEED_10    10
#define SPEED_100   100
#define SPEED_1000  1000
#define HALF_DUPLEX 1
#define FULL_DUPLEX 2

/* The sizes (in bytes) of a ethernet packet */
#define ENET_HEADER_SIZE             14
#define MAXIMUM_ETHERNET_FRAME_SIZE  1518 /* With FCS */
#define MINIMUM_ETHERNET_FRAME_SIZE  64   /* With FCS */
#define ETHERNET_FCS_SIZE            4
#define MAXIMUM_ETHERNET_PACKET_SIZE \
    (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
#define MINIMUM_ETHERNET_PACKET_SIZE \
    (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
#define CRC_LENGTH                   ETHERNET_FCS_SIZE
#define MAX_JUMBO_FRAME_SIZE         0x3F00

/* 802.1q VLAN Packet Sizes */
#define VLAN_TAG_SIZE                     4     /* 802.3ac tag (not DMAed) */

/* Ethertype field values */
#define ETHERNET_IEEE_VLAN_TYPE 0x8100    /* 802.3ac packet */
#define ETHERNET_IP_TYPE        0x0800    /* IP packets */
#define ETHERNET_ARP_TYPE       0x0806    /* Address Resolution Protocol (ARP) */

/* Packet Header defines */
#define IP_PROTOCOL_TCP    6
#define IP_PROTOCOL_UDP    0x11

/* This defines the bits that are set in the Interrupt Mask
 * Set/Read Register.  Each bit is documented below:
 *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
 *   o RXSEQ  = Receive Sequence Error
 */
#define POLL_IMS_ENABLE_MASK ( \
    E1000_IMS_RXDMT0 |         \
    E1000_IMS_RXSEQ)

/* This defines the bits that are set in the Interrupt Mask
 * Set/Read Register.  Each bit is documented below:
 *   o RXT0   = Receiver Timer Interrupt (ring 0)
 *   o TXDW   = Transmit Descriptor Written Back
 *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
 *   o RXSEQ  = Receive Sequence Error
 *   o LSC    = Link Status Change
 */
#define IMS_ENABLE_MASK ( \
    E1000_IMS_RXT0   |    \
    E1000_IMS_TXDW   |    \
    E1000_IMS_RXDMT0 |    \
    E1000_IMS_RXSEQ  |    \
    E1000_IMS_LSC)

/* The number of high/low register pairs in the RAR. The RAR (Receive Address
 * Registers) holds the directed and multicast addresses that we monitor. We
 * reserve one of these spots for our directed address, allowing us room for
 * E1000_RAR_ENTRIES - 1 multicast addresses.
 */
#define E1000_RAR_ENTRIES 16

#define MIN_NUMBER_OF_DESCRIPTORS 8
#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8

/* Receive Descriptor */
struct e1000_rx_desc {
      uint64_t buffer_addr;   /* Address of the descriptor's data buffer */
      uint16_t length;  /* Length of data DMAed into data buffer */
      uint16_t csum;          /* Packet checksum */
      uint8_t status;         /* Descriptor status */
      uint8_t errors;         /* Descriptor Errors */
      uint16_t special;
};

/* Receive Decriptor bit definitions */
#define E1000_RXD_STAT_DD       0x01      /* Descriptor Done */
#define E1000_RXD_STAT_EOP      0x02      /* End of Packet */
#define E1000_RXD_STAT_IXSM     0x04      /* Ignore checksum */
#define E1000_RXD_STAT_VP       0x08      /* IEEE VLAN Packet */
#define E1000_RXD_STAT_TCPCS    0x20      /* TCP xsum calculated */
#define E1000_RXD_STAT_IPCS     0x40      /* IP xsum calculated */
#define E1000_RXD_STAT_PIF      0x80      /* passed in-exact filter */
#define E1000_RXD_ERR_CE        0x01      /* CRC Error */
#define E1000_RXD_ERR_SE        0x02      /* Symbol Error */
#define E1000_RXD_ERR_SEQ       0x04      /* Sequence Error */
#define E1000_RXD_ERR_CXE       0x10      /* Carrier Extension Error */
#define E1000_RXD_ERR_TCPE      0x20      /* TCP/UDP Checksum Error */
#define E1000_RXD_ERR_IPE       0x40      /* IP Checksum Error */
#define E1000_RXD_ERR_RXE       0x80      /* Rx Data Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF    /* VLAN ID is in lower 12 bits */
#define E1000_RXD_SPC_PRI_MASK  0xE000    /* Priority is in upper 3 bits */
#define E1000_RXD_SPC_PRI_SHIFT 0x000D    /* Priority is in upper 3 of 16 */
#define E1000_RXD_SPC_CFI_MASK  0x1000    /* CFI is bit 12 */
#define E1000_RXD_SPC_CFI_SHIFT 0x000C    /* CFI is bit 12 */

/* mask to determine if packets should be dropped due to frame errors */
#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
    E1000_RXD_ERR_CE  |                \
    E1000_RXD_ERR_SE  |                \
    E1000_RXD_ERR_SEQ |                \
    E1000_RXD_ERR_CXE |                \
    E1000_RXD_ERR_RXE)

/* Transmit Descriptor */
struct e1000_tx_desc {
      uint64_t buffer_addr;   /* Address of the descriptor's data buffer */
      union {
            uint32_t data;
            struct {
                  uint16_t length;  /* Data buffer length */
                  uint8_t cso;      /* Checksum offset */
                  uint8_t cmd;      /* Descriptor control */
            } flags;
      } lower;
      union {
            uint32_t data;
            struct {
                  uint8_t status;   /* Descriptor status */
                  uint8_t css;      /* Checksum start */
                  uint16_t special;
            } fields;
      } upper;
};

/* Transmit Descriptor bit definitions */
#define E1000_TXD_DTYP_D     0x00100000   /* Data Descriptor */
#define E1000_TXD_DTYP_C     0x00000000   /* Context Descriptor */
#define E1000_TXD_POPTS_IXSM 0x01   /* Insert IP checksum */
#define E1000_TXD_POPTS_TXSM 0x02   /* Insert TCP/UDP checksum */
#define E1000_TXD_CMD_EOP    0x01000000   /* End of Packet */
#define E1000_TXD_CMD_IFCS   0x02000000   /* Insert FCS (Ethernet CRC) */
#define E1000_TXD_CMD_IC     0x04000000   /* Insert Checksum */
#define E1000_TXD_CMD_RS     0x08000000   /* Report Status */
#define E1000_TXD_CMD_RPS    0x10000000   /* Report Packet Sent */
#define E1000_TXD_CMD_DEXT   0x20000000   /* Descriptor extension (0 = legacy) */
#define E1000_TXD_CMD_VLE    0x40000000   /* Add VLAN tag */
#define E1000_TXD_CMD_IDE    0x80000000   /* Enable Tidv register */
#define E1000_TXD_STAT_DD    0x00000001   /* Descriptor Done */
#define E1000_TXD_STAT_EC    0x00000002   /* Excess Collisions */
#define E1000_TXD_STAT_LC    0x00000004   /* Late Collisions */
#define E1000_TXD_STAT_TU    0x00000008   /* Transmit underrun */
#define E1000_TXD_CMD_TCP    0x01000000   /* TCP packet */
#define E1000_TXD_CMD_IP     0x02000000   /* IP packet */
#define E1000_TXD_CMD_TSE    0x04000000   /* TCP Seg enable */
#define E1000_TXD_STAT_TC    0x00000004   /* Tx Underrun */

/* Offload Context Descriptor */
struct e1000_context_desc {
      union {
            uint32_t ip_config;
            struct {
                  uint8_t ipcss;    /* IP checksum start */
                  uint8_t ipcso;    /* IP checksum offset */
                  uint16_t ipcse;   /* IP checksum end */
            } ip_fields;
      } lower_setup;
      union {
            uint32_t tcp_config;
            struct {
                  uint8_t tucss;    /* TCP checksum start */
                  uint8_t tucso;    /* TCP checksum offset */
                  uint16_t tucse;   /* TCP checksum end */
            } tcp_fields;
      } upper_setup;
      uint32_t cmd_and_length;      /* */
      union {
            uint32_t data;
            struct {
                  uint8_t status;   /* Descriptor status */
                  uint8_t hdr_len;  /* Header length */
                  uint16_t mss;     /* Maximum segment size */
            } fields;
      } tcp_seg_setup;
};

/* Offload data descriptor */
struct e1000_data_desc {
      uint64_t buffer_addr;   /* Address of the descriptor's buffer address */
      union {
            uint32_t data;
            struct {
                  uint16_t length;  /* Data buffer length */
                  uint8_t typ_len_ext;    /* */
                  uint8_t cmd;      /* */
            } flags;
      } lower;
      union {
            uint32_t data;
            struct {
                  uint8_t status;   /* Descriptor status */
                  uint8_t popts;    /* Packet Options */
                  uint16_t special; /* */
            } fields;
      } upper;
};

/* Filters */
#define E1000_NUM_UNICAST          16     /* Unicast filter entries */
#define E1000_MC_TBL_SIZE          128    /* Multicast Filter Table (4096 bits) */
#define E1000_VLAN_FILTER_TBL_SIZE 128    /* VLAN Filter Table (4096 bits) */

/* Receive Address Register */
struct e1000_rar {
      volatile uint32_t low;  /* receive address low */
      volatile uint32_t high; /* receive address high */
};

/* The number of entries in the Multicast Table Array (MTA). */
#define E1000_NUM_MTA_REGISTERS 128

/* IPv4 Address Table Entry */
struct e1000_ipv4_at_entry {
      volatile uint32_t ipv4_addr;  /* IP Address (RW) */
      volatile uint32_t reserved;
};

/* Four wakeup IP addresses are supported */
#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
#define E1000_IP4AT_SIZE                  E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
#define E1000_IP6AT_SIZE                  1

/* IPv6 Address Table Entry */
struct e1000_ipv6_at_entry {
      volatile uint8_t ipv6_addr[16];
};

/* Flexible Filter Length Table Entry */
struct e1000_fflt_entry {
      volatile uint32_t length;     /* Flexible Filter Length (RW) */
      volatile uint32_t reserved;
};

/* Flexible Filter Mask Table Entry */
struct e1000_ffmt_entry {
      volatile uint32_t mask; /* Flexible Filter Mask (RW) */
      volatile uint32_t reserved;
};

/* Flexible Filter Value Table Entry */
struct e1000_ffvt_entry {
      volatile uint32_t value;      /* Flexible Filter Value (RW) */
      volatile uint32_t reserved;
};

/* Four Flexible Filters are supported */
#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4

/* Each Flexible Filter is at most 128 (0x80) bytes in length */
#define E1000_FLEXIBLE_FILTER_SIZE_MAX  128

#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX

/* Register Set. (82543, 82544)
 *
 * Registers are defined to be 32 bits and  should be accessed as 32 bit values.
 * These registers are physically located on the NIC, but are mapped into the
 * host memory address space.
 *
 * RW - register is both readable and writable
 * RO - register is read only
 * WO - register is write only
 * R/clr - register is read only and is cleared when read
 * A - register array
 */
#define E1000_CTRL     0x00000      /* Device Control - RW */
#define E1000_STATUS   0x00008      /* Device Status - RO */
#define E1000_EECD     0x00010      /* EEPROM/Flash Control - RW */
#define E1000_EERD     0x00014      /* EEPROM Read - RW */
#define E1000_CTRL_EXT 0x00018      /* Extended Device Control - RW */
#define E1000_MDIC     0x00020      /* MDI Control - RW */
#define E1000_FCAL     0x00028      /* Flow Control Address Low - RW */
#define E1000_FCAH     0x0002C      /* Flow Control Address High -RW */
#define E1000_FCT      0x00030      /* Flow Control Type - RW */
#define E1000_VET      0x00038      /* VLAN Ether Type - RW */
#define E1000_ICR      0x000C0      /* Interrupt Cause Read - R/clr */
#define E1000_ITR      0x000C4      /* Interrupt Throttling Rate - RW */
#define E1000_ICS      0x000C8      /* Interrupt Cause Set - WO */
#define E1000_IMS      0x000D0      /* Interrupt Mask Set - RW */
#define E1000_IMC      0x000D8      /* Interrupt Mask Clear - WO */
#define E1000_RCTL     0x00100      /* RX Control - RW */
#define E1000_FCTTV    0x00170      /* Flow Control Transmit Timer Value - RW */
#define E1000_TXCW     0x00178      /* TX Configuration Word - RW */
#define E1000_RXCW     0x00180      /* RX Configuration Word - RO */
#define E1000_TCTL     0x00400      /* TX Control - RW */
#define E1000_TIPG     0x00410      /* TX Inter-packet gap -RW */
#define E1000_TBT      0x00448      /* TX Burst Timer - RW */
#define E1000_AIT      0x00458      /* Adaptive Interframe Spacing Throttle - RW */
#define E1000_LEDCTL   0x00E00      /* LED Control - RW */
#define E1000_PBA      0x01000      /* Packet Buffer Allocation - RW */
#define E1000_FCRTL    0x02160      /* Flow Control Receive Threshold Low - RW */
#define E1000_FCRTH    0x02168      /* Flow Control Receive Threshold High - RW */
#define E1000_RDBAL    0x02800      /* RX Descriptor Base Address Low - RW */
#define E1000_RDBAH    0x02804      /* RX Descriptor Base Address High - RW */
#define E1000_RDLEN    0x02808      /* RX Descriptor Length - RW */
#define E1000_RDH      0x02810      /* RX Descriptor Head - RW */
#define E1000_RDT      0x02818      /* RX Descriptor Tail - RW */
#define E1000_RDTR     0x02820      /* RX Delay Timer - RW */
#define E1000_RXDCTL   0x02828      /* RX Descriptor Control - RW */
#define E1000_RADV     0x0282C      /* RX Interrupt Absolute Delay Timer - RW */
#define E1000_RSRPD    0x02C00      /* RX Small Packet Detect - RW */
#define E1000_TXDMAC   0x03000      /* TX DMA Control - RW */
#define E1000_TDBAL    0x03800      /* TX Descriptor Base Address Low - RW */
#define E1000_TDBAH    0x03804      /* TX Descriptor Base Address High - RW */
#define E1000_TDLEN    0x03808      /* TX Descriptor Length - RW */
#define E1000_TDH      0x03810      /* TX Descriptor Head - RW */
#define E1000_TDT      0x03818      /* TX Descripotr Tail - RW */
#define E1000_TIDV     0x03820      /* TX Interrupt Delay Value - RW */
#define E1000_TXDCTL   0x03828      /* TX Descriptor Control - RW */
#define E1000_TADV     0x0382C      /* TX Interrupt Absolute Delay Val - RW */
#define E1000_TSPMT    0x03830      /* TCP Segmentation PAD & Min Threshold - RW */
#define E1000_CRCERRS  0x04000      /* CRC Error Count - R/clr */
#define E1000_ALGNERRC 0x04004      /* Alignment Error Count - R/clr */
#define E1000_SYMERRS  0x04008      /* Symbol Error Count - R/clr */
#define E1000_RXERRC   0x0400C      /* Receive Error Count - R/clr */
#define E1000_MPC      0x04010      /* Missed Packet Count - R/clr */
#define E1000_SCC      0x04014      /* Single Collision Count - R/clr */
#define E1000_ECOL     0x04018      /* Excessive Collision Count - R/clr */
#define E1000_MCC      0x0401C      /* Multiple Collision Count - R/clr */
#define E1000_LATECOL  0x04020      /* Late Collision Count - R/clr */
#define E1000_COLC     0x04028      /* Collision Count - R/clr */
#define E1000_DC       0x04030      /* Defer Count - R/clr */
#define E1000_TNCRS    0x04034      /* TX-No CRS - R/clr */
#define E1000_SEC      0x04038      /* Sequence Error Count - R/clr */
#define E1000_CEXTERR  0x0403C      /* Carrier Extension Error Count - R/clr */
#define E1000_RLEC     0x04040      /* Receive Length Error Count - R/clr */
#define E1000_XONRXC   0x04048      /* XON RX Count - R/clr */
#define E1000_XONTXC   0x0404C      /* XON TX Count - R/clr */
#define E1000_XOFFRXC  0x04050      /* XOFF RX Count - R/clr */
#define E1000_XOFFTXC  0x04054      /* XOFF TX Count - R/clr */
#define E1000_FCRUC    0x04058      /* Flow Control RX Unsupported Count- R/clr */
#define E1000_PRC64    0x0405C      /* Packets RX (64 bytes) - R/clr */
#define E1000_PRC127   0x04060      /* Packets RX (65-127 bytes) - R/clr */
#define E1000_PRC255   0x04064      /* Packets RX (128-255 bytes) - R/clr */
#define E1000_PRC511   0x04068      /* Packets RX (255-511 bytes) - R/clr */
#define E1000_PRC1023  0x0406C      /* Packets RX (512-1023 bytes) - R/clr */
#define E1000_PRC1522  0x04070      /* Packets RX (1024-1522 bytes) - R/clr */
#define E1000_GPRC     0x04074      /* Good Packets RX Count - R/clr */
#define E1000_BPRC     0x04078      /* Broadcast Packets RX Count - R/clr */
#define E1000_MPRC     0x0407C      /* Multicast Packets RX Count - R/clr */
#define E1000_GPTC     0x04080      /* Good Packets TX Count - R/clr */
#define E1000_GORCL    0x04088      /* Good Octets RX Count Low - R/clr */
#define E1000_GORCH    0x0408C      /* Good Octets RX Count High - R/clr */
#define E1000_GOTCL    0x04090      /* Good Octets TX Count Low - R/clr */
#define E1000_GOTCH    0x04094      /* Good Octets TX Count High - R/clr */
#define E1000_RNBC     0x040A0      /* RX No Buffers Count - R/clr */
#define E1000_RUC      0x040A4      /* RX Undersize Count - R/clr */
#define E1000_RFC      0x040A8      /* RX Fragment Count - R/clr */
#define E1000_ROC      0x040AC      /* RX Oversize Count - R/clr */
#define E1000_RJC      0x040B0      /* RX Jabber Count - R/clr */
#define E1000_MGTPRC   0x040B4      /* Management Packets RX Count - R/clr */
#define E1000_MGTPDC   0x040B8      /* Management Packets Dropped Count - R/clr */
#define E1000_MGTPTC   0x040BC      /* Management Packets TX Count - R/clr */
#define E1000_TORL     0x040C0      /* Total Octets RX Low - R/clr */
#define E1000_TORH     0x040C4      /* Total Octets RX High - R/clr */
#define E1000_TOTL     0x040C8      /* Total Octets TX Low - R/clr */
#define E1000_TOTH     0x040CC      /* Total Octets TX High - R/clr */
#define E1000_TPR      0x040D0      /* Total Packets RX - R/clr */
#define E1000_TPT      0x040D4      /* Total Packets TX - R/clr */
#define E1000_PTC64    0x040D8      /* Packets TX (64 bytes) - R/clr */
#define E1000_PTC127   0x040DC      /* Packets TX (65-127 bytes) - R/clr */
#define E1000_PTC255   0x040E0      /* Packets TX (128-255 bytes) - R/clr */
#define E1000_PTC511   0x040E4      /* Packets TX (256-511 bytes) - R/clr */
#define E1000_PTC1023  0x040E8      /* Packets TX (512-1023 bytes) - R/clr */
#define E1000_PTC1522  0x040EC      /* Packets TX (1024-1522 Bytes) - R/clr */
#define E1000_MPTC     0x040F0      /* Multicast Packets TX Count - R/clr */
#define E1000_BPTC     0x040F4      /* Broadcast Packets TX Count - R/clr */
#define E1000_TSCTC    0x040F8      /* TCP Segmentation Context TX - R/clr */
#define E1000_TSCTFC   0x040FC      /* TCP Segmentation Context TX Fail - R/clr */
#define E1000_RXCSUM   0x05000      /* RX Checksum Control - RW */
#define E1000_MTA      0x05200      /* Multicast Table Array - RW Array */
#define E1000_RA       0x05400      /* Receive Address - RW Array */
#define E1000_VFTA     0x05600      /* VLAN Filter Table Array - RW Array */
#define E1000_WUC      0x05800      /* Wakeup Control - RW */
#define E1000_WUFC     0x05808      /* Wakeup Filter Control - RW */
#define E1000_WUS      0x05810      /* Wakeup Status - RO */
#define E1000_MANC     0x05820      /* Management Control - RW */
#define E1000_IPAV     0x05838      /* IP Address Valid - RW */
#define E1000_IP4AT    0x05840      /* IPv4 Address Table - RW Array */
#define E1000_IP6AT    0x05880      /* IPv6 Address Table - RW Array */
#define E1000_WUPL     0x05900      /* Wakeup Packet Length - RW */
#define E1000_WUPM     0x05A00      /* Wakeup Packet Memory - RO A */
#define E1000_FFLT     0x05F00      /* Flexible Filter Length Table - RW Array */
#define E1000_FFMT     0x09000      /* Flexible Filter Mask Table - RW Array */
#define E1000_FFVT     0x09800      /* Flexible Filter Value Table - RW Array */

/* Register Set (82542)
 *
 * Some of the 82542 registers are located at different offsets than they are
 * in more current versions of the 8254x. Despite the difference in location,
 * the registers function in the same manner.
 */
#define E1000_82542_CTRL     E1000_CTRL
#define E1000_82542_STATUS   E1000_STATUS
#define E1000_82542_EECD     E1000_EECD
#define E1000_82542_EERD     E1000_EERD
#define E1000_82542_CTRL_EXT E1000_CTRL_EXT
#define E1000_82542_MDIC     E1000_MDIC
#define E1000_82542_FCAL     E1000_FCAL
#define E1000_82542_FCAH     E1000_FCAH
#define E1000_82542_FCT      E1000_FCT
#define E1000_82542_VET      E1000_VET
#define E1000_82542_RA       0x00040
#define E1000_82542_ICR      E1000_ICR
#define E1000_82542_ITR      E1000_ITR
#define E1000_82542_ICS      E1000_ICS
#define E1000_82542_IMS      E1000_IMS
#define E1000_82542_IMC      E1000_IMC
#define E1000_82542_RCTL     E1000_RCTL
#define E1000_82542_RDTR     0x00108
#define E1000_82542_RDBAL    0x00110
#define E1000_82542_RDBAH    0x00114
#define E1000_82542_RDLEN    0x00118
#define E1000_82542_RDH      0x00120
#define E1000_82542_RDT      0x00128
#define E1000_82542_FCRTH    0x00160
#define E1000_82542_FCRTL    0x00168
#define E1000_82542_FCTTV    E1000_FCTTV
#define E1000_82542_TXCW     E1000_TXCW
#define E1000_82542_RXCW     E1000_RXCW
#define E1000_82542_MTA      0x00200
#define E1000_82542_TCTL     E1000_TCTL
#define E1000_82542_TIPG     E1000_TIPG
#define E1000_82542_TDBAL    0x00420
#define E1000_82542_TDBAH    0x00424
#define E1000_82542_TDLEN    0x00428
#define E1000_82542_TDH      0x00430
#define E1000_82542_TDT      0x00438
#define E1000_82542_TIDV     0x00440
#define E1000_82542_TBT      E1000_TBT
#define E1000_82542_AIT      E1000_AIT
#define E1000_82542_VFTA     0x00600
#define E1000_82542_LEDCTL   E1000_LEDCTL
#define E1000_82542_PBA      E1000_PBA
#define E1000_82542_RXDCTL   E1000_RXDCTL
#define E1000_82542_RADV     E1000_RADV
#define E1000_82542_RSRPD    E1000_RSRPD
#define E1000_82542_TXDMAC   E1000_TXDMAC
#define E1000_82542_TXDCTL   E1000_TXDCTL
#define E1000_82542_TADV     E1000_TADV
#define E1000_82542_TSPMT    E1000_TSPMT
#define E1000_82542_CRCERRS  E1000_CRCERRS
#define E1000_82542_ALGNERRC E1000_ALGNERRC
#define E1000_82542_SYMERRS  E1000_SYMERRS
#define E1000_82542_RXERRC   E1000_RXERRC
#define E1000_82542_MPC      E1000_MPC
#define E1000_82542_SCC      E1000_SCC
#define E1000_82542_ECOL     E1000_ECOL
#define E1000_82542_MCC      E1000_MCC
#define E1000_82542_LATECOL  E1000_LATECOL
#define E1000_82542_COLC     E1000_COLC
#define E1000_82542_DC       E1000_DC
#define E1000_82542_TNCRS    E1000_TNCRS
#define E1000_82542_SEC      E1000_SEC
#define E1000_82542_CEXTERR  E1000_CEXTERR
#define E1000_82542_RLEC     E1000_RLEC
#define E1000_82542_XONRXC   E1000_XONRXC
#define E1000_82542_XONTXC   E1000_XONTXC
#define E1000_82542_XOFFRXC  E1000_XOFFRXC
#define E1000_82542_XOFFTXC  E1000_XOFFTXC
#define E1000_82542_FCRUC    E1000_FCRUC
#define E1000_82542_PRC64    E1000_PRC64
#define E1000_82542_PRC127   E1000_PRC127
#define E1000_82542_PRC255   E1000_PRC255
#define E1000_82542_PRC511   E1000_PRC511
#define E1000_82542_PRC1023  E1000_PRC1023
#define E1000_82542_PRC1522  E1000_PRC1522
#define E1000_82542_GPRC     E1000_GPRC
#define E1000_82542_BPRC     E1000_BPRC
#define E1000_82542_MPRC     E1000_MPRC
#define E1000_82542_GPTC     E1000_GPTC
#define E1000_82542_GORCL    E1000_GORCL
#define E1000_82542_GORCH    E1000_GORCH
#define E1000_82542_GOTCL    E1000_GOTCL
#define E1000_82542_GOTCH    E1000_GOTCH
#define E1000_82542_RNBC     E1000_RNBC
#define E1000_82542_RUC      E1000_RUC
#define E1000_82542_RFC      E1000_RFC
#define E1000_82542_ROC      E1000_ROC
#define E1000_82542_RJC      E1000_RJC
#define E1000_82542_MGTPRC   E1000_MGTPRC
#define E1000_82542_MGTPDC   E1000_MGTPDC
#define E1000_82542_MGTPTC   E1000_MGTPTC
#define E1000_82542_TORL     E1000_TORL
#define E1000_82542_TORH     E1000_TORH
#define E1000_82542_TOTL     E1000_TOTL
#define E1000_82542_TOTH     E1000_TOTH
#define E1000_82542_TPR      E1000_TPR
#define E1000_82542_TPT      E1000_TPT
#define E1000_82542_PTC64    E1000_PTC64
#define E1000_82542_PTC127   E1000_PTC127
#define E1000_82542_PTC255   E1000_PTC255
#define E1000_82542_PTC511   E1000_PTC511
#define E1000_82542_PTC1023  E1000_PTC1023
#define E1000_82542_PTC1522  E1000_PTC1522
#define E1000_82542_MPTC     E1000_MPTC
#define E1000_82542_BPTC     E1000_BPTC
#define E1000_82542_TSCTC    E1000_TSCTC
#define E1000_82542_TSCTFC   E1000_TSCTFC
#define E1000_82542_RXCSUM   E1000_RXCSUM
#define E1000_82542_WUC      E1000_WUC
#define E1000_82542_WUFC     E1000_WUFC
#define E1000_82542_WUS      E1000_WUS
#define E1000_82542_MANC     E1000_MANC
#define E1000_82542_IPAV     E1000_IPAV
#define E1000_82542_IP4AT    E1000_IP4AT
#define E1000_82542_IP6AT    E1000_IP6AT
#define E1000_82542_WUPL     E1000_WUPL
#define E1000_82542_WUPM     E1000_WUPM
#define E1000_82542_FFLT     E1000_FFLT
#define E1000_82542_FFMT     E1000_FFMT
#define E1000_82542_FFVT     E1000_FFVT

/* Statistics counters collected by the MAC */
struct e1000_hw_stats {
      uint64_t crcerrs;
      uint64_t algnerrc;
      uint64_t symerrs;
      uint64_t rxerrc;
      uint64_t mpc;
      uint64_t scc;
      uint64_t ecol;
      uint64_t mcc;
      uint64_t latecol;
      uint64_t colc;
      uint64_t dc;
      uint64_t tncrs;
      uint64_t sec;
      uint64_t cexterr;
      uint64_t rlec;
      uint64_t xonrxc;
      uint64_t xontxc;
      uint64_t xoffrxc;
      uint64_t xofftxc;
      uint64_t fcruc;
      uint64_t prc64;
      uint64_t prc127;
      uint64_t prc255;
      uint64_t prc511;
      uint64_t prc1023;
      uint64_t prc1522;
      uint64_t gprc;
      uint64_t bprc;
      uint64_t mprc;
      uint64_t gptc;
      uint64_t gorcl;
      uint64_t gorch;
      uint64_t gotcl;
      uint64_t gotch;
      uint64_t rnbc;
      uint64_t ruc;
      uint64_t rfc;
      uint64_t roc;
      uint64_t rjc;
      uint64_t mgprc;
      uint64_t mgpdc;
      uint64_t mgptc;
      uint64_t torl;
      uint64_t torh;
      uint64_t totl;
      uint64_t toth;
      uint64_t tpr;
      uint64_t tpt;
      uint64_t ptc64;
      uint64_t ptc127;
      uint64_t ptc255;
      uint64_t ptc511;
      uint64_t ptc1023;
      uint64_t ptc1522;
      uint64_t mptc;
      uint64_t bptc;
      uint64_t tsctc;
      uint64_t tsctfc;
};

/* Structure containing variables used by the shared code (e1000_hw.c) */
struct e1000_hw {
      pci_dev_t pdev;
      uint8_t *hw_addr;
      e1000_mac_type mac_type;
      e1000_media_type media_type;
      e1000_lan_loc lan_loc;
      e1000_fc_type fc;
#if 0
      e1000_bus_speed bus_speed;
      e1000_bus_width bus_width;
      e1000_bus_type bus_type;
      uint32_t io_base;
#endif
      uint32_t phy_id;
      uint32_t phy_addr;
      uint32_t original_fc;
      uint32_t txcw;
      uint32_t autoneg_failed;
#if 0
      uint32_t max_frame_size;
      uint32_t min_frame_size;
      uint32_t mc_filter_type;
      uint32_t num_mc_addrs;
      uint32_t collision_delta;
      uint32_t tx_packet_delta;
      uint32_t ledctl_default;
      uint32_t ledctl_mode1;
      uint32_t ledctl_mode2;
#endif
      uint16_t autoneg_advertised;
      uint16_t pci_cmd_word;
      uint16_t fc_high_water;
      uint16_t fc_low_water;
      uint16_t fc_pause_time;
#if 0
      uint16_t current_ifs_val;
      uint16_t ifs_min_val;
      uint16_t ifs_max_val;
      uint16_t ifs_step_size;
      uint16_t ifs_ratio;
#endif
      uint16_t device_id;
      uint16_t vendor_id;
      uint16_t subsystem_id;
      uint16_t subsystem_vendor_id;
      uint8_t revision_id;
#if 0
      uint8_t autoneg;
      uint8_t mdix;
      uint8_t forced_speed_duplex;
      uint8_t wait_autoneg_complete;
      uint8_t dma_fairness;
#endif
#if 0
      uint8_t perm_mac_addr[NODE_ADDRESS_SIZE];
      boolean_t disable_polarity_correction;
#endif
      boolean_t get_link_status;
      boolean_t tbi_compatibility_en;
      boolean_t tbi_compatibility_on;
      boolean_t fc_send_xon;
      boolean_t report_tx_early;
#if 0
      boolean_t adaptive_ifs;
      boolean_t ifs_params_forced;
      boolean_t in_ifs_mode;
#endif
};

#define E1000_EEPROM_SWDPIN0   0x0001     /* SWDPIN 0 EEPROM Value */
#define E1000_EEPROM_LED_LOGIC 0x0020     /* Led Logic Word */

/* Register Bit Masks */
/* Device Control */
#define E1000_CTRL_FD       0x00000001    /* Full duplex.0=half; 1=full */
#define E1000_CTRL_BEM      0x00000002    /* Endian Mode.0=little,1=big */
#define E1000_CTRL_PRIOR    0x00000004    /* Priority on PCI. 0=rx,1=fair */
#define E1000_CTRL_LRST     0x00000008    /* Link reset. 0=normal,1=reset */
#define E1000_CTRL_TME      0x00000010    /* Test mode. 0=normal,1=test */
#define E1000_CTRL_SLE      0x00000020    /* Serial Link on 0=dis,1=en */
#define E1000_CTRL_ASDE     0x00000020    /* Auto-speed detect enable */
#define E1000_CTRL_SLU      0x00000040    /* Set link up (Force Link) */
#define E1000_CTRL_ILOS     0x00000080    /* Invert Loss-Of Signal */
#define E1000_CTRL_SPD_SEL  0x00000300    /* Speed Select Mask */
#define E1000_CTRL_SPD_10   0x00000000    /* Force 10Mb */
#define E1000_CTRL_SPD_100  0x00000100    /* Force 100Mb */
#define E1000_CTRL_SPD_1000 0x00000200    /* Force 1Gb */
#define E1000_CTRL_BEM32    0x00000400    /* Big Endian 32 mode */
#define E1000_CTRL_FRCSPD   0x00000800    /* Force Speed */
#define E1000_CTRL_FRCDPX   0x00001000    /* Force Duplex */
#define E1000_CTRL_SWDPIN0  0x00040000    /* SWDPIN 0 value */
#define E1000_CTRL_SWDPIN1  0x00080000    /* SWDPIN 1 value */
#define E1000_CTRL_SWDPIN2  0x00100000    /* SWDPIN 2 value */
#define E1000_CTRL_SWDPIN3  0x00200000    /* SWDPIN 3 value */
#define E1000_CTRL_SWDPIO0  0x00400000    /* SWDPIN 0 Input or output */
#define E1000_CTRL_SWDPIO1  0x00800000    /* SWDPIN 1 input or output */
#define E1000_CTRL_SWDPIO2  0x01000000    /* SWDPIN 2 input or output */
#define E1000_CTRL_SWDPIO3  0x02000000    /* SWDPIN 3 input or output */
#define E1000_CTRL_RST      0x04000000    /* Global reset */
#define E1000_CTRL_RFCE     0x08000000    /* Receive Flow Control enable */
#define E1000_CTRL_TFCE     0x10000000    /* Transmit flow control enable */
#define E1000_CTRL_RTE      0x20000000    /* Routing tag enable */
#define E1000_CTRL_VME      0x40000000    /* IEEE VLAN mode enable */
#define E1000_CTRL_PHY_RST  0x80000000    /* PHY Reset */

/* Device Status */
#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
#define E1000_STATUS_FUNC_MASK  0x0000000C      /* PCI Function Mask */
#define E1000_STATUS_FUNC_0     0x00000000      /* Function 0 */
#define E1000_STATUS_FUNC_1     0x00000004      /* Function 1 */
#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
#define E1000_STATUS_TBIMODE    0x00000020      /* TBI mode */
#define E1000_STATUS_SPEED_MASK 0x000000C0
#define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
#define E1000_STATUS_ASDV       0x00000300      /* Auto speed detect value */
#define E1000_STATUS_MTXCKOK    0x00000400      /* MTX clock running OK */
#define E1000_STATUS_PCI66      0x00000800      /* In 66Mhz slot */
#define E1000_STATUS_BUS64      0x00001000      /* In 64 bit slot */
#define E1000_STATUS_PCIX_MODE  0x00002000      /* PCI-X mode */
#define E1000_STATUS_PCIX_SPEED 0x0000C000      /* PCI-X bus speed */

/* Constants used to intrepret the masked PCI-X bus speed. */
#define E1000_STATUS_PCIX_SPEED_66  0x00000000  /* PCI-X bus speed  50-66 MHz */
#define E1000_STATUS_PCIX_SPEED_100 0x00004000  /* PCI-X bus speed  66-100 MHz */
#define E1000_STATUS_PCIX_SPEED_133 0x00008000  /* PCI-X bus speed 100-133 MHz */

/* EEPROM/Flash Control */
#define E1000_EECD_SK        0x00000001   /* EEPROM Clock */
#define E1000_EECD_CS        0x00000002   /* EEPROM Chip Select */
#define E1000_EECD_DI        0x00000004   /* EEPROM Data In */
#define E1000_EECD_DO        0x00000008   /* EEPROM Data Out */
#define E1000_EECD_FWE_MASK  0x00000030
#define E1000_EECD_FWE_DIS   0x00000010   /* Disable FLASH writes */
#define E1000_EECD_FWE_EN    0x00000020   /* Enable FLASH writes */
#define E1000_EECD_FWE_SHIFT 4
#define E1000_EECD_SIZE      0x00000200   /* EEPROM Size (0=64 word 1=256 word) */
#define E1000_EECD_REQ       0x00000040   /* EEPROM Access Request */
#define E1000_EECD_GNT       0x00000080   /* EEPROM Access Grant */
#define E1000_EECD_PRES      0x00000100   /* EEPROM Present */

/* EEPROM Read */
#define E1000_EERD_START      0x00000001  /* Start Read */
#define E1000_EERD_DONE       0x00000010  /* Read Done */
#define E1000_EERD_ADDR_SHIFT 8
#define E1000_EERD_ADDR_MASK  0x0000FF00  /* Read Address */
#define E1000_EERD_DATA_SHIFT 16
#define E1000_EERD_DATA_MASK  0xFFFF0000  /* Read Data */

/* Extended Device Control */
#define E1000_CTRL_EXT_GPI0_EN   0x00000001     /* Maps SDP4 to GPI0 */
#define E1000_CTRL_EXT_GPI1_EN   0x00000002     /* Maps SDP5 to GPI1 */
#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
#define E1000_CTRL_EXT_GPI2_EN   0x00000004     /* Maps SDP6 to GPI2 */
#define E1000_CTRL_EXT_GPI3_EN   0x00000008     /* Maps SDP7 to GPI3 */
#define E1000_CTRL_EXT_SDP4_DATA 0x00000010     /* Value of SW Defineable Pin 4 */
#define E1000_CTRL_EXT_SDP5_DATA 0x00000020     /* Value of SW Defineable Pin 5 */
#define E1000_CTRL_EXT_PHY_INT   E1000_CTRL_EXT_SDP5_DATA
#define E1000_CTRL_EXT_SDP6_DATA 0x00000040     /* Value of SW Defineable Pin 6 */
#define E1000_CTRL_EXT_SWDPIN6       0x00000040 /* SWDPIN 6 value */
#define E1000_CTRL_EXT_SDP7_DATA 0x00000080     /* Value of SW Defineable Pin 7 */
#define E1000_CTRL_EXT_SWDPIN7       0x00000080 /* SWDPIN 7 value */
#define E1000_CTRL_EXT_SDP4_DIR  0x00000100     /* Direction of SDP4 0=in 1=out */
#define E1000_CTRL_EXT_SDP5_DIR  0x00000200     /* Direction of SDP5 0=in 1=out */
#define E1000_CTRL_EXT_SDP6_DIR  0x00000400     /* Direction of SDP6 0=in 1=out */
#define E1000_CTRL_EXT_SWDPIO6   0x00000400     /* SWDPIN 6 Input or output */
#define E1000_CTRL_EXT_SDP7_DIR  0x00000800     /* Direction of SDP7 0=in 1=out */
#define E1000_CTRL_EXT_SWDPIO7   0x00000800     /* SWDPIN 7 Input or output */
#define E1000_CTRL_EXT_ASDCHK    0x00001000     /* Initiate an ASD sequence */
#define E1000_CTRL_EXT_EE_RST    0x00002000     /* Reinitialize from EEPROM */
#define E1000_CTRL_EXT_IPS       0x00004000     /* Invert Power State */
#define E1000_CTRL_EXT_SPD_BYPS  0x00008000     /* Speed Select Bypass */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
#define E1000_CTRL_EXT_LINK_MODE_TBI  0x00C00000
#define E1000_CTRL_EXT_WR_WMARK_MASK  0x03000000
#define E1000_CTRL_EXT_WR_WMARK_256   0x00000000
#define E1000_CTRL_EXT_WR_WMARK_320   0x01000000
#define E1000_CTRL_EXT_WR_WMARK_384   0x02000000
#define E1000_CTRL_EXT_WR_WMARK_448   0x03000000

/* MDI Control */
#define E1000_MDIC_DATA_MASK 0x0000FFFF
#define E1000_MDIC_REG_MASK  0x001F0000
#define E1000_MDIC_REG_SHIFT 16
#define E1000_MDIC_PHY_MASK  0x03E00000
#define E1000_MDIC_PHY_SHIFT 21
#define E1000_MDIC_OP_WRITE  0x04000000
#define E1000_MDIC_OP_READ   0x08000000
#define E1000_MDIC_READY     0x10000000
#define E1000_MDIC_INT_EN    0x20000000
#define E1000_MDIC_ERROR     0x40000000

/* LED Control */
#define E1000_LEDCTL_LED0_MODE_MASK  0x0000000F
#define E1000_LEDCTL_LED0_MODE_SHIFT 0
#define E1000_LEDCTL_LED0_IVRT       0x00000040
#define E1000_LEDCTL_LED0_BLINK      0x00000080
#define E1000_LEDCTL_LED1_MODE_MASK  0x00000F00
#define E1000_LEDCTL_LED1_MODE_SHIFT 8
#define E1000_LEDCTL_LED1_IVRT       0x00004000
#define E1000_LEDCTL_LED1_BLINK      0x00008000
#define E1000_LEDCTL_LED2_MODE_MASK  0x000F0000
#define E1000_LEDCTL_LED2_MODE_SHIFT 16
#define E1000_LEDCTL_LED2_IVRT       0x00400000
#define E1000_LEDCTL_LED2_BLINK      0x00800000
#define E1000_LEDCTL_LED3_MODE_MASK  0x0F000000
#define E1000_LEDCTL_LED3_MODE_SHIFT 24
#define E1000_LEDCTL_LED3_IVRT       0x40000000
#define E1000_LEDCTL_LED3_BLINK      0x80000000

#define E1000_LEDCTL_MODE_LINK_10_1000  0x0
#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
#define E1000_LEDCTL_MODE_LINK_UP       0x2
#define E1000_LEDCTL_MODE_ACTIVITY      0x3
#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
#define E1000_LEDCTL_MODE_LINK_10       0x5
#define E1000_LEDCTL_MODE_LINK_100      0x6
#define E1000_LEDCTL_MODE_LINK_1000     0x7
#define E1000_LEDCTL_MODE_PCIX_MODE     0x8
#define E1000_LEDCTL_MODE_FULL_DUPLEX   0x9
#define E1000_LEDCTL_MODE_COLLISION     0xA
#define E1000_LEDCTL_MODE_BUS_SPEED     0xB
#define E1000_LEDCTL_MODE_BUS_SIZE      0xC
#define E1000_LEDCTL_MODE_PAUSED        0xD
#define E1000_LEDCTL_MODE_LED_ON        0xE
#define E1000_LEDCTL_MODE_LED_OFF       0xF

/* Receive Address */
#define E1000_RAH_AV  0x80000000    /* Receive descriptor valid */

/* Interrupt Cause Read */
#define E1000_ICR_TXDW    0x00000001      /* Transmit desc written back */
#define E1000_ICR_TXQE    0x00000002      /* Transmit Queue empty */
#define E1000_ICR_LSC     0x00000004      /* Link Status Change */
#define E1000_ICR_RXSEQ   0x00000008      /* rx sequence error */
#define E1000_ICR_RXDMT0  0x00000010      /* rx desc min. threshold (0) */
#define E1000_ICR_RXO     0x00000040      /* rx overrun */
#define E1000_ICR_RXT0    0x00000080      /* rx timer intr (ring 0) */
#define E1000_ICR_MDAC    0x00000200      /* MDIO access complete */
#define E1000_ICR_RXCFG   0x00000400      /* RX /c/ ordered set */
#define E1000_ICR_GPI_EN0 0x00000800      /* GP Int 0 */
#define E1000_ICR_GPI_EN1 0x00001000      /* GP Int 1 */
#define E1000_ICR_GPI_EN2 0x00002000      /* GP Int 2 */
#define E1000_ICR_GPI_EN3 0x00004000      /* GP Int 3 */
#define E1000_ICR_TXD_LOW 0x00008000
#define E1000_ICR_SRPD    0x00010000

/* Interrupt Cause Set */
#define E1000_ICS_TXDW    E1000_ICR_TXDW  /* Transmit desc written back */
#define E1000_ICS_TXQE    E1000_ICR_TXQE  /* Transmit Queue empty */
#define E1000_ICS_LSC     E1000_ICR_LSC   /* Link Status Change */
#define E1000_ICS_RXSEQ   E1000_ICR_RXSEQ /* rx sequence error */
#define E1000_ICS_RXDMT0  E1000_ICR_RXDMT0      /* rx desc min. threshold */
#define E1000_ICS_RXO     E1000_ICR_RXO   /* rx overrun */
#define E1000_ICS_RXT0    E1000_ICR_RXT0  /* rx timer intr */
#define E1000_ICS_MDAC    E1000_ICR_MDAC  /* MDIO access complete */
#define E1000_ICS_RXCFG   E1000_ICR_RXCFG /* RX /c/ ordered set */
#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0     /* GP Int 0 */
#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1     /* GP Int 1 */
#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2     /* GP Int 2 */
#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3     /* GP Int 3 */
#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_ICS_SRPD    E1000_ICR_SRPD

/* Interrupt Mask Set */
#define E1000_IMS_TXDW    E1000_ICR_TXDW  /* Transmit desc written back */
#define E1000_IMS_TXQE    E1000_ICR_TXQE  /* Transmit Queue empty */
#define E1000_IMS_LSC     E1000_ICR_LSC   /* Link Status Change */
#define E1000_IMS_RXSEQ   E1000_ICR_RXSEQ /* rx sequence error */
#define E1000_IMS_RXDMT0  E1000_ICR_RXDMT0      /* rx desc min. threshold */
#define E1000_IMS_RXO     E1000_ICR_RXO   /* rx overrun */
#define E1000_IMS_RXT0    E1000_ICR_RXT0  /* rx timer intr */
#define E1000_IMS_MDAC    E1000_ICR_MDAC  /* MDIO access complete */
#define E1000_IMS_RXCFG   E1000_ICR_RXCFG /* RX /c/ ordered set */
#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0     /* GP Int 0 */
#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1     /* GP Int 1 */
#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2     /* GP Int 2 */
#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3     /* GP Int 3 */
#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_IMS_SRPD    E1000_ICR_SRPD

/* Interrupt Mask Clear */
#define E1000_IMC_TXDW    E1000_ICR_TXDW  /* Transmit desc written back */
#define E1000_IMC_TXQE    E1000_ICR_TXQE  /* Transmit Queue empty */
#define E1000_IMC_LSC     E1000_ICR_LSC   /* Link Status Change */
#define E1000_IMC_RXSEQ   E1000_ICR_RXSEQ /* rx sequence error */
#define E1000_IMC_RXDMT0  E1000_ICR_RXDMT0      /* rx desc min. threshold */
#define E1000_IMC_RXO     E1000_ICR_RXO   /* rx overrun */
#define E1000_IMC_RXT0    E1000_ICR_RXT0  /* rx timer intr */
#define E1000_IMC_MDAC    E1000_ICR_MDAC  /* MDIO access complete */
#define E1000_IMC_RXCFG   E1000_ICR_RXCFG /* RX /c/ ordered set */
#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0     /* GP Int 0 */
#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1     /* GP Int 1 */
#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2     /* GP Int 2 */
#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3     /* GP Int 3 */
#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_IMC_SRPD    E1000_ICR_SRPD

/* Receive Control */
#define E1000_RCTL_RST          0x00000001      /* Software reset */
#define E1000_RCTL_EN           0x00000002      /* enable */
#define E1000_RCTL_SBP          0x00000004      /* store bad packet */
#define E1000_RCTL_UPE          0x00000008      /* unicast promiscuous enable */
#define E1000_RCTL_MPE          0x00000010      /* multicast promiscuous enab */
#define E1000_RCTL_LPE          0x00000020      /* long packet enable */
#define E1000_RCTL_LBM_NO       0x00000000      /* no loopback mode */
#define E1000_RCTL_LBM_MAC      0x00000040      /* MAC loopback mode */
#define E1000_RCTL_LBM_SLP      0x00000080      /* serial link loopback mode */
#define E1000_RCTL_LBM_TCVR     0x000000C0      /* tcvr loopback mode */
#define E1000_RCTL_RDMTS_HALF   0x00000000      /* rx desc min threshold size */
#define E1000_RCTL_RDMTS_QUAT   0x00000100      /* rx desc min threshold size */
#define E1000_RCTL_RDMTS_EIGTH  0x00000200      /* rx desc min threshold size */
#define E1000_RCTL_MO_SHIFT     12  /* multicast offset shift */
#define E1000_RCTL_MO_0         0x00000000      /* multicast offset 11:0 */
#define E1000_RCTL_MO_1         0x00001000      /* multicast offset 12:1 */
#define E1000_RCTL_MO_2         0x00002000      /* multicast offset 13:2 */
#define E1000_RCTL_MO_3         0x00003000      /* multicast offset 15:4 */
#define E1000_RCTL_MDR          0x00004000      /* multicast desc ring 0 */
#define E1000_RCTL_BAM          0x00008000      /* broadcast enable */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
#define E1000_RCTL_SZ_2048      0x00000000      /* rx buffer size 2048 */
#define E1000_RCTL_SZ_1024      0x00010000      /* rx buffer size 1024 */
#define E1000_RCTL_SZ_512       0x00020000      /* rx buffer size 512 */
#define E1000_RCTL_SZ_256       0x00030000      /* rx buffer size 256 */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
#define E1000_RCTL_SZ_16384     0x00010000      /* rx buffer size 16384 */
#define E1000_RCTL_SZ_8192      0x00020000      /* rx buffer size 8192 */
#define E1000_RCTL_SZ_4096      0x00030000      /* rx buffer size 4096 */
#define E1000_RCTL_VFE          0x00040000      /* vlan filter enable */
#define E1000_RCTL_CFIEN        0x00080000      /* canonical form enable */
#define E1000_RCTL_CFI          0x00100000      /* canonical form indicator */
#define E1000_RCTL_DPF          0x00400000      /* discard pause frames */
#define E1000_RCTL_PMCF         0x00800000      /* pass MAC control frames */
#define E1000_RCTL_BSEX         0x02000000      /* Buffer size extension */

/* Receive Descriptor */
#define E1000_RDT_DELAY 0x0000ffff  /* Delay timer (1=1024us) */
#define E1000_RDT_FPDB  0x80000000  /* Flush descriptor block */
#define E1000_RDLEN_LEN 0x0007ff80  /* descriptor length */
#define E1000_RDH_RDH   0x0000ffff  /* receive descriptor head */
#define E1000_RDT_RDT   0x0000ffff  /* receive descriptor tail */

/* Flow Control */
#define E1000_FCRTH_RTH  0x0000FFF8 /* Mask Bits[15:3] for RTH */
#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
#define E1000_FCRTL_RTL  0x0000FFF8 /* Mask Bits[15:3] for RTL */
#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */

/* Receive Descriptor Control */
#define E1000_RXDCTL_PTHRESH 0x0000003F   /* RXDCTL Prefetch Threshold */
#define E1000_RXDCTL_HTHRESH 0x00003F00   /* RXDCTL Host Threshold */
#define E1000_RXDCTL_WTHRESH 0x003F0000   /* RXDCTL Writeback Threshold */
#define E1000_RXDCTL_GRAN    0x01000000   /* RXDCTL Granularity */

/* Transmit Descriptor Control */
#define E1000_TXDCTL_PTHRESH 0x000000FF   /* TXDCTL Prefetch Threshold */
#define E1000_TXDCTL_HTHRESH 0x0000FF00   /* TXDCTL Host Threshold */
#define E1000_TXDCTL_WTHRESH 0x00FF0000   /* TXDCTL Writeback Threshold */
#define E1000_TXDCTL_GRAN    0x01000000   /* TXDCTL Granularity */
#define E1000_TXDCTL_LWTHRESH 0xFE000000  /* TXDCTL Low Threshold */
#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */

/* Transmit Configuration Word */
#define E1000_TXCW_FD         0x00000020  /* TXCW full duplex */
#define E1000_TXCW_HD         0x00000040  /* TXCW half duplex */
#define E1000_TXCW_PAUSE      0x00000080  /* TXCW sym pause request */
#define E1000_TXCW_ASM_DIR    0x00000100  /* TXCW astm pause direction */
#define E1000_TXCW_PAUSE_MASK 0x00000180  /* TXCW pause request mask */
#define E1000_TXCW_RF         0x00003000  /* TXCW remote fault */
#define E1000_TXCW_NP         0x00008000  /* TXCW next page */
#define E1000_TXCW_CW         0x0000ffff  /* TxConfigWord mask */
#define E1000_TXCW_TXC        0x40000000  /* Transmit Config control */
#define E1000_TXCW_ANE        0x80000000  /* Auto-neg enable */

/* Receive Configuration Word */
#define E1000_RXCW_CW    0x0000ffff /* RxConfigWord mask */
#define E1000_RXCW_NC    0x04000000 /* Receive config no carrier */
#define E1000_RXCW_IV    0x08000000 /* Receive config invalid */
#define E1000_RXCW_CC    0x10000000 /* Receive config change */
#define E1000_RXCW_C     0x20000000 /* Receive config */
#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
#define E1000_RXCW_ANC   0x80000000 /* Auto-neg complete */

/* Transmit Control */
#define E1000_TCTL_RST    0x00000001      /* software reset */
#define E1000_TCTL_EN     0x00000002      /* enable tx */
#define E1000_TCTL_BCE    0x00000004      /* busy check enable */
#define E1000_TCTL_PSP    0x00000008      /* pad short packets */
#define E1000_TCTL_CT     0x00000ff0      /* collision threshold */
#define E1000_TCTL_COLD   0x003ff000      /* collision distance */
#define E1000_TCTL_SWXOFF 0x00400000      /* SW Xoff transmission */
#define E1000_TCTL_PBE    0x00800000      /* Packet Burst Enable */
#define E1000_TCTL_RTLC   0x01000000      /* Re-transmit on late collision */
#define E1000_TCTL_NRTU   0x02000000      /* No Re-transmit on underrun */

/* Receive Checksum Control */
#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
#define E1000_RXCSUM_IPOFL     0x00000100 /* IPv4 checksum offload */
#define E1000_RXCSUM_TUOFL     0x00000200 /* TCP / UDP checksum offload */
#define E1000_RXCSUM_IPV6OFL   0x00000400 /* IPv6 checksum offload */

/* Definitions for power management and wakeup registers */
/* Wake Up Control */
#define E1000_WUC_APME       0x00000001   /* APM Enable */
#define E1000_WUC_PME_EN     0x00000002   /* PME Enable */
#define E1000_WUC_PME_STATUS 0x00000004   /* PME Status */
#define E1000_WUC_APMPME     0x00000008   /* Assert PME on APM Wakeup */

/* Wake Up Filter Control */
#define E1000_WUFC_LNKC 0x00000001  /* Link Status Change Wakeup Enable */
#define E1000_WUFC_MAG  0x00000002  /* Magic Packet Wakeup Enable */
#define E1000_WUFC_EX   0x00000004  /* Directed Exact Wakeup Enable */
#define E1000_WUFC_MC   0x00000008  /* Directed Multicast Wakeup Enable */
#define E1000_WUFC_BC   0x00000010  /* Broadcast Wakeup Enable */
#define E1000_WUFC_ARP  0x00000020  /* ARP Request Packet Wakeup Enable */
#define E1000_WUFC_IPV4 0x00000040  /* Directed IPv4 Packet Wakeup Enable */
#define E1000_WUFC_IPV6 0x00000080  /* Directed IPv6 Packet Wakeup Enable */
#define E1000_WUFC_FLX0 0x00010000  /* Flexible Filter 0 Enable */
#define E1000_WUFC_FLX1 0x00020000  /* Flexible Filter 1 Enable */
#define E1000_WUFC_FLX2 0x00040000  /* Flexible Filter 2 Enable */
#define E1000_WUFC_FLX3 0x00080000  /* Flexible Filter 3 Enable */
#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
#define E1000_WUFC_FLX_OFFSET 16    /* Offset to the Flexible Filters bits */
#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */

/* Wake Up Status */
#define E1000_WUS_LNKC 0x00000001   /* Link Status Changed */
#define E1000_WUS_MAG  0x00000002   /* Magic Packet Received */
#define E1000_WUS_EX   0x00000004   /* Directed Exact Received */
#define E1000_WUS_MC   0x00000008   /* Directed Multicast Received */
#define E1000_WUS_BC   0x00000010   /* Broadcast Received */
#define E1000_WUS_ARP  0x00000020   /* ARP Request Packet Received */
#define E1000_WUS_IPV4 0x00000040   /* Directed IPv4 Packet Wakeup Received */
#define E1000_WUS_IPV6 0x00000080   /* Directed IPv6 Packet Wakeup Received */
#define E1000_WUS_FLX0 0x00010000   /* Flexible Filter 0 Match */
#define E1000_WUS_FLX1 0x00020000   /* Flexible Filter 1 Match */
#define E1000_WUS_FLX2 0x00040000   /* Flexible Filter 2 Match */
#define E1000_WUS_FLX3 0x00080000   /* Flexible Filter 3 Match */
#define E1000_WUS_FLX_FILTERS 0x000F0000  /* Mask for the 4 flexible filters */

/* Management Control */
#define E1000_MANC_SMBUS_EN      0x00000001     /* SMBus Enabled - RO */
#define E1000_MANC_ASF_EN        0x00000002     /* ASF Enabled - RO */
#define E1000_MANC_R_ON_FORCE    0x00000004     /* Reset on Force TCO - RO */
#define E1000_MANC_RMCP_EN       0x00000100     /* Enable RCMP 026Fh Filtering */
#define E1000_MANC_0298_EN       0x00000200     /* Enable RCMP 0298h Filtering */
#define E1000_MANC_IPV4_EN       0x00000400     /* Enable IPv4 */
#define E1000_MANC_IPV6_EN       0x00000800     /* Enable IPv6 */
#define E1000_MANC_SNAP_EN       0x00001000     /* Accept LLC/SNAP */
#define E1000_MANC_ARP_EN        0x00002000     /* Enable ARP Request Filtering */
#define E1000_MANC_NEIGHBOR_EN   0x00004000     /* Enable Neighbor Discovery
                                     * Filtering */
#define E1000_MANC_TCO_RESET     0x00010000     /* TCO Reset Occurred */
#define E1000_MANC_RCV_TCO_EN    0x00020000     /* Receive TCO Packets Enabled */
#define E1000_MANC_REPORT_STATUS 0x00040000     /* Status Reporting Enabled */
#define E1000_MANC_SMB_REQ       0x01000000     /* SMBus Request */
#define E1000_MANC_SMB_GNT       0x02000000     /* SMBus Grant */
#define E1000_MANC_SMB_CLK_IN    0x04000000     /* SMBus Clock In */
#define E1000_MANC_SMB_DATA_IN   0x08000000     /* SMBus Data In */
#define E1000_MANC_SMB_DATA_OUT  0x10000000     /* SMBus Data Out */
#define E1000_MANC_SMB_CLK_OUT   0x20000000     /* SMBus Clock Out */

#define E1000_MANC_SMB_DATA_OUT_SHIFT  28 /* SMBus Data Out Shift */
#define E1000_MANC_SMB_CLK_OUT_SHIFT   29 /* SMBus Clock Out Shift */

/* Wake Up Packet Length */
#define E1000_WUPL_LENGTH_MASK 0x0FFF     /* Only the lower 12 bits are valid */

#define E1000_MDALIGN          4096

/* EEPROM Commands */
#define EEPROM_READ_OPCODE  0x6     /* EERPOM read opcode */
#define EEPROM_WRITE_OPCODE 0x5     /* EERPOM write opcode */
#define EEPROM_ERASE_OPCODE 0x7     /* EERPOM erase opcode */
#define EEPROM_EWEN_OPCODE  0x13    /* EERPOM erase/write enable */
#define EEPROM_EWDS_OPCODE  0x10    /* EERPOM erast/write disable */

/* EEPROM Word Offsets */
#define EEPROM_COMPAT              0x0003
#define EEPROM_ID_LED_SETTINGS     0x0004
#define EEPROM_INIT_CONTROL1_REG   0x000A
#define EEPROM_INIT_CONTROL2_REG   0x000F
#define EEPROM_FLASH_VERSION       0x0032
#define EEPROM_CHECKSUM_REG        0x003F

/* Word definitions for ID LED Settings */
#define ID_LED_RESERVED_0000 0x0000
#define ID_LED_RESERVED_FFFF 0xFFFF
#define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2 << 12) | \
                        (ID_LED_OFF1_OFF2 << 8) | \
                        (ID_LED_DEF1_DEF2 << 4) | \
                        (ID_LED_DEF1_DEF2))
#define ID_LED_DEF1_DEF2     0x1
#define ID_LED_DEF1_ON2      0x2
#define ID_LED_DEF1_OFF2     0x3
#define ID_LED_ON1_DEF2      0x4
#define ID_LED_ON1_ON2       0x5
#define ID_LED_ON1_OFF2      0x6
#define ID_LED_OFF1_DEF2     0x7
#define ID_LED_OFF1_ON2      0x8
#define ID_LED_OFF1_OFF2     0x9

/* Mask bits for fields in Word 0x03 of the EEPROM */
#define EEPROM_COMPAT_SERVER 0x0400
#define EEPROM_COMPAT_CLIENT 0x0200

/* Mask bits for fields in Word 0x0a of the EEPROM */
#define EEPROM_WORD0A_ILOS   0x0010
#define EEPROM_WORD0A_SWDPIO 0x01E0
#define EEPROM_WORD0A_LRST   0x0200
#define EEPROM_WORD0A_FD     0x0400
#define EEPROM_WORD0A_66MHZ  0x0800

/* Mask bits for fields in Word 0x0f of the EEPROM */
#define EEPROM_WORD0F_PAUSE_MASK 0x3000
#define EEPROM_WORD0F_PAUSE      0x1000
#define EEPROM_WORD0F_ASM_DIR    0x2000
#define EEPROM_WORD0F_ANE        0x0800
#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0

/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
#define EEPROM_SUM 0xBABA

/* EEPROM Map defines (WORD OFFSETS)*/
#define EEPROM_NODE_ADDRESS_BYTE_0 0
#define EEPROM_PBA_BYTE_1          8

/* EEPROM Map Sizes (Byte Counts) */
#define PBA_SIZE 4

/* Collision related configuration parameters */
#define E1000_COLLISION_THRESHOLD       16
#define E1000_CT_SHIFT                  4
#define E1000_COLLISION_DISTANCE        64
#define E1000_FDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
#define E1000_HDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
#define E1000_GB_HDX_COLLISION_DISTANCE 512
#define E1000_COLD_SHIFT                12

/* The number of Transmit and Receive Descriptors must be a multiple of 8 */
#define REQ_TX_DESCRIPTOR_MULTIPLE  8
#define REQ_RX_DESCRIPTOR_MULTIPLE  8

/* Default values for the transmit IPG register */
#define DEFAULT_82542_TIPG_IPGT        10
#define DEFAULT_82543_TIPG_IPGT_FIBER  9
#define DEFAULT_82543_TIPG_IPGT_COPPER 8

#define E1000_TIPG_IPGT_MASK  0x000003FF
#define E1000_TIPG_IPGR1_MASK 0x000FFC00
#define E1000_TIPG_IPGR2_MASK 0x3FF00000

#define DEFAULT_82542_TIPG_IPGR1 2
#define DEFAULT_82543_TIPG_IPGR1 8
#define E1000_TIPG_IPGR1_SHIFT  10

#define DEFAULT_82542_TIPG_IPGR2 10
#define DEFAULT_82543_TIPG_IPGR2 6
#define E1000_TIPG_IPGR2_SHIFT  20

#define E1000_TXDMAC_DPP 0x00000001

/* Adaptive IFS defines */
#define TX_THRESHOLD_START     8
#define TX_THRESHOLD_INCREMENT 10
#define TX_THRESHOLD_DECREMENT 1
#define TX_THRESHOLD_STOP      190
#define TX_THRESHOLD_DISABLE   0
#define TX_THRESHOLD_TIMER_MS  10000
#define MIN_NUM_XMITS          1000
#define IFS_MAX                80
#define IFS_STEP               10
#define IFS_MIN                40
#define IFS_RATIO              4

/* PBA constants */
#define E1000_PBA_16K 0x0010  /* 16KB, default TX allocation */
#define E1000_PBA_24K 0x0018
#define E1000_PBA_40K 0x0028
#define E1000_PBA_48K 0x0030  /* 48KB, default RX allocation */

/* Flow Control Constants */
#define FLOW_CONTROL_ADDRESS_LOW  0x00C28001
#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
#define FLOW_CONTROL_TYPE         0x8808

/* The historical defaults for the flow control values are given below. */
#define FC_DEFAULT_HI_THRESH        (0x8000)    /* 32KB */
#define FC_DEFAULT_LO_THRESH        (0x4000)    /* 16KB */
#define FC_DEFAULT_TX_TIMER         (0x100)     /* ~130 us */

/* Flow Control High-Watermark: 43464 bytes */
#define E1000_FC_HIGH_THRESH 0xA9C8
/* Flow Control Low-Watermark: 43456 bytes */
#define E1000_FC_LOW_THRESH 0xA9C0
/* Flow Control Pause Time: 858 usec */
#define E1000_FC_PAUSE_TIME 0x0680

/* PCIX Config space */
#define PCIX_COMMAND_REGISTER    0xE6
#define PCIX_STATUS_REGISTER_LO  0xE8
#define PCIX_STATUS_REGISTER_HI  0xEA

#define PCIX_COMMAND_MMRBC_MASK      0x000C
#define PCIX_COMMAND_MMRBC_SHIFT     0x2
#define PCIX_STATUS_HI_MMRBC_MASK    0x0060
#define PCIX_STATUS_HI_MMRBC_SHIFT   0x5
#define PCIX_STATUS_HI_MMRBC_4K      0x3
#define PCIX_STATUS_HI_MMRBC_2K      0x2

/* The number of bits that we need to shift right to move the "pause"
 * bits from the EEPROM (bits 13:12) to the "pause" (bits 8:7) field
 * in the TXCW register
 */
#define PAUSE_SHIFT 5

/* The number of bits that we need to shift left to move the "SWDPIO"
 * bits from the EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field
 * in the CTRL register
 */
#define SWDPIO_SHIFT 17

/* The number of bits that we need to shift left to move the "SWDPIO_EXT"
 * bits from the EEPROM word F (bits 7:4) to the bits 11:8 of The
 * Extended CTRL register.
 * in the CTRL register
 */
#define SWDPIO__EXT_SHIFT 4

/* The number of bits that we need to shift left to move the "ILOS"
 * bit from the EEPROM (bit 4) to the "ILOS" (bit 7) field
 * in the CTRL register
 */
#define ILOS_SHIFT  3

#define RECEIVE_BUFFER_ALIGN_SIZE  (256)

/* The number of milliseconds we wait for auto-negotiation to complete */
#define LINK_UP_TIMEOUT             500

#define E1000_TX_BUFFER_SIZE ((uint32_t)1514)

/* The carrier extension symbol, as received by the NIC. */
#define CARRIER_EXTENSION   0x0F

/* TBI_ACCEPT macro definition:
 *
 * This macro requires:
 *      adapter = a pointer to struct e1000_hw
 *      status = the 8 bit status field of the RX descriptor with EOP set
 *      error = the 8 bit error field of the RX descriptor with EOP set
 *      length = the sum of all the length fields of the RX descriptors that
 *               make up the current frame
 *      last_byte = the last byte of the frame DMAed by the hardware
 *      max_frame_length = the maximum frame length we want to accept.
 *      min_frame_length = the minimum frame length we want to accept.
 *
 * This macro is a conditional that should be used in the interrupt
 * handler's Rx processing routine when RxErrors have been detected.
 *
 * Typical use:
 *  ...
 *  if (TBI_ACCEPT) {
 *      accept_frame = TRUE;
 *      e1000_tbi_adjust_stats(adapter, MacAddress);
 *      frame_length--;
 *  } else {
 *      accept_frame = FALSE;
 *  }
 *  ...
 */

#define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
    ((adapter)->tbi_compatibility_on && \
     (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
     ((last_byte) == CARRIER_EXTENSION) && \
     (((status) & E1000_RXD_STAT_VP) ? \
        (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
         ((length) <= ((adapter)->max_frame_size + 1))) : \
        (((length) > (adapter)->min_frame_size) && \
         ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))

/* Structures, enums, and macros for the PHY */

/* Bit definitions for the Management Data IO (MDIO) and Management Data
 * Clock (MDC) pins in the Device Control Register.
 */
#define E1000_CTRL_PHY_RESET_DIR  E1000_CTRL_SWDPIO0
#define E1000_CTRL_PHY_RESET      E1000_CTRL_SWDPIN0
#define E1000_CTRL_MDIO_DIR       E1000_CTRL_SWDPIO2
#define E1000_CTRL_MDIO           E1000_CTRL_SWDPIN2
#define E1000_CTRL_MDC_DIR        E1000_CTRL_SWDPIO3
#define E1000_CTRL_MDC            E1000_CTRL_SWDPIN3
#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
#define E1000_CTRL_PHY_RESET4     E1000_CTRL_EXT_SDP4_DATA

/* PHY 1000 MII Register/Bit Definitions */
/* PHY Registers defined by IEEE */
#define PHY_CTRL         0x00 /* Control Register */
#define PHY_STATUS       0x01 /* Status Regiser */
#define PHY_ID1          0x02 /* Phy Id Reg (word 1) */
#define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
#define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
#define PHY_LP_ABILITY   0x05 /* Link Partner Ability (Base Page) */
#define PHY_AUTONEG_EXP  0x06 /* Autoneg Expansion Reg */
#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
#define PHY_1000T_CTRL   0x09 /* 1000Base-T Control Reg */
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
#define PHY_EXT_STATUS   0x0F /* Extended Status Reg */

/* M88E1000 Specific Registers */
#define M88E1000_PHY_SPEC_CTRL     0x10   /* PHY Specific Control Register */
#define M88E1000_PHY_SPEC_STATUS   0x11   /* PHY Specific Status Register */
#define M88E1000_INT_ENABLE        0x12   /* Interrupt Enable Register */
#define M88E1000_INT_STATUS        0x13   /* Interrupt Status Register */
#define M88E1000_EXT_PHY_SPEC_CTRL 0x14   /* Extended PHY Specific Control */
#define M88E1000_RX_ERR_CNTR       0x15   /* Receive Error Counter */

#define MAX_PHY_REG_ADDRESS 0x1F    /* 5 bit address bus (0-0x1F) */

/* PHY Control Register */
#define MII_CR_SPEED_SELECT_MSB 0x0040    /* bits 6,13: 10=1000, 01=100, 00=10 */
#define MII_CR_COLL_TEST_ENABLE 0x0080    /* Collision test enable */
#define MII_CR_FULL_DUPLEX      0x0100    /* FDX =1, half duplex =0 */
#define MII_CR_RESTART_AUTO_NEG 0x0200    /* Restart auto negotiation */
#define MII_CR_ISOLATE          0x0400    /* Isolate PHY from MII */
#define MII_CR_POWER_DOWN       0x0800    /* Power down */
#define MII_CR_AUTO_NEG_EN      0x1000    /* Auto Neg Enable */
#define MII_CR_SPEED_SELECT_LSB 0x2000    /* bits 6,13: 10=1000, 01=100, 00=10 */
#define MII_CR_LOOPBACK         0x4000    /* 0 = normal, 1 = loopback */
#define MII_CR_RESET            0x8000    /* 0 = normal, 1 = PHY reset */

/* PHY Status Register */
#define MII_SR_EXTENDED_CAPS     0x0001   /* Extended register capabilities */
#define MII_SR_JABBER_DETECT     0x0002   /* Jabber Detected */
#define MII_SR_LINK_STATUS       0x0004   /* Link Status 1 = link */
#define MII_SR_AUTONEG_CAPS      0x0008   /* Auto Neg Capable */
#define MII_SR_REMOTE_FAULT      0x0010   /* Remote Fault Detect */
#define MII_SR_AUTONEG_COMPLETE  0x0020   /* Auto Neg Complete */
#define MII_SR_PREAMBLE_SUPPRESS 0x0040   /* Preamble may be suppressed */
#define MII_SR_EXTENDED_STATUS   0x0100   /* Ext. status info in Reg 0x0F */
#define MII_SR_100T2_HD_CAPS     0x0200   /* 100T2 Half Duplex Capable */
#define MII_SR_100T2_FD_CAPS     0x0400   /* 100T2 Full Duplex Capable */
#define MII_SR_10T_HD_CAPS       0x0800   /* 10T   Half Duplex Capable */
#define MII_SR_10T_FD_CAPS       0x1000   /* 10T   Full Duplex Capable */
#define MII_SR_100X_HD_CAPS      0x2000   /* 100X  Half Duplex Capable */
#define MII_SR_100X_FD_CAPS      0x4000   /* 100X  Full Duplex Capable */
#define MII_SR_100T4_CAPS        0x8000   /* 100T4 Capable */

/* Autoneg Advertisement Register */
#define NWAY_AR_SELECTOR_FIELD 0x0001     /* indicates IEEE 802.3 CSMA/CD */
#define NWAY_AR_10T_HD_CAPS    0x0020     /* 10T   Half Duplex Capable */
#define NWAY_AR_10T_FD_CAPS    0x0040     /* 10T   Full Duplex Capable */
#define NWAY_AR_100TX_HD_CAPS  0x0080     /* 100TX Half Duplex Capable */
#define NWAY_AR_100TX_FD_CAPS  0x0100     /* 100TX Full Duplex Capable */
#define NWAY_AR_100T4_CAPS     0x0200     /* 100T4 Capable */
#define NWAY_AR_PAUSE          0x0400     /* Pause operation desired */
#define NWAY_AR_ASM_DIR        0x0800     /* Asymmetric Pause Direction bit */
#define NWAY_AR_REMOTE_FAULT   0x2000     /* Remote Fault detected */
#define NWAY_AR_NEXT_PAGE      0x8000     /* Next Page ability supported */

/* Link Partner Ability Register (Base Page) */
#define NWAY_LPAR_SELECTOR_FIELD 0x0000   /* LP protocol selector field */
#define NWAY_LPAR_10T_HD_CAPS    0x0020   /* LP is 10T   Half Duplex Capable */
#define NWAY_LPAR_10T_FD_CAPS    0x0040   /* LP is 10T   Full Duplex Capable */
#define NWAY_LPAR_100TX_HD_CAPS  0x0080   /* LP is 100TX Half Duplex Capable */
#define NWAY_LPAR_100TX_FD_CAPS  0x0100   /* LP is 100TX Full Duplex Capable */
#define NWAY_LPAR_100T4_CAPS     0x0200   /* LP is 100T4 Capable */
#define NWAY_LPAR_PAUSE          0x0400   /* LP Pause operation desired */
#define NWAY_LPAR_ASM_DIR        0x0800   /* LP Asymmetric Pause Direction bit */
#define NWAY_LPAR_REMOTE_FAULT   0x2000   /* LP has detected Remote Fault */
#define NWAY_LPAR_ACKNOWLEDGE    0x4000   /* LP has rx'd link code word */
#define NWAY_LPAR_NEXT_PAGE      0x8000   /* Next Page ability supported */

/* Autoneg Expansion Register */
#define NWAY_ER_LP_NWAY_CAPS      0x0001  /* LP has Auto Neg Capability */
#define NWAY_ER_PAGE_RXD          0x0002  /* LP is 10T   Half Duplex Capable */
#define NWAY_ER_NEXT_PAGE_CAPS    0x0004  /* LP is 10T   Full Duplex Capable */
#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008  /* LP is 100TX Half Duplex Capable */
#define NWAY_ER_PAR_DETECT_FAULT  0x0100  /* LP is 100TX Full Duplex Capable */

/* Next Page TX Register */
#define NPTX_MSG_CODE_FIELD 0x0001  /* NP msg code or unformatted data */
#define NPTX_TOGGLE         0x0800  /* Toggles between exchanges
                               * of different NP
                               */
#define NPTX_ACKNOWLDGE2    0x1000  /* 1 = will comply with msg
                               * 0 = cannot comply with msg
                               */
#define NPTX_MSG_PAGE       0x2000  /* formatted(1)/unformatted(0) pg */
#define NPTX_NEXT_PAGE      0x8000  /* 1 = addition NP will follow
                               * 0 = sending last NP
                               */

/* Link Partner Next Page Register */
#define LP_RNPR_MSG_CODE_FIELD 0x0001     /* NP msg code or unformatted data */
#define LP_RNPR_TOGGLE         0x0800     /* Toggles between exchanges
                               * of different NP
                               */
#define LP_RNPR_ACKNOWLDGE2    0x1000     /* 1 = will comply with msg
                               * 0 = cannot comply with msg
                               */
#define LP_RNPR_MSG_PAGE       0x2000     /* formatted(1)/unformatted(0) pg */
#define LP_RNPR_ACKNOWLDGE     0x4000     /* 1 = ACK / 0 = NO ACK */
#define LP_RNPR_NEXT_PAGE      0x8000     /* 1 = addition NP will follow
                               * 0 = sending last NP
                               */

/* 1000BASE-T Control Register */
#define CR_1000T_ASYM_PAUSE      0x0080   /* Advertise asymmetric pause bit */
#define CR_1000T_HD_CAPS         0x0100   /* Advertise 1000T HD capability */
#define CR_1000T_FD_CAPS         0x0200   /* Advertise 1000T FD capability  */
#define CR_1000T_REPEATER_DTE    0x0400   /* 1=Repeater/switch device port */
                              /* 0=DTE device */
#define CR_1000T_MS_VALUE        0x0800   /* 1=Configure PHY as Master */
                              /* 0=Configure PHY as Slave */
#define CR_1000T_MS_ENABLE       0x1000   /* 1=Master/Slave manual config value */
                              /* 0=Automatic Master/Slave config */
#define CR_1000T_TEST_MODE_NORMAL 0x0000  /* Normal Operation */
#define CR_1000T_TEST_MODE_1     0x2000   /* Transmit Waveform test */
#define CR_1000T_TEST_MODE_2     0x4000   /* Master Transmit Jitter test */
#define CR_1000T_TEST_MODE_3     0x6000   /* Slave Transmit Jitter test */
#define CR_1000T_TEST_MODE_4     0x8000   /* Transmitter Distortion test */

/* 1000BASE-T Status Register */
#define SR_1000T_IDLE_ERROR_CNT   0x00FF  /* Num idle errors since last read */
#define SR_1000T_ASYM_PAUSE_DIR   0x0100  /* LP asymmetric pause direction bit */
#define SR_1000T_LP_HD_CAPS       0x0400  /* LP is 1000T HD capable */
#define SR_1000T_LP_FD_CAPS       0x0800  /* LP is 1000T FD capable */
#define SR_1000T_REMOTE_RX_STATUS 0x1000  /* Remote receiver OK */
#define SR_1000T_LOCAL_RX_STATUS  0x2000  /* Local receiver OK */
#define SR_1000T_MS_CONFIG_RES    0x4000  /* 1=Local TX is Master, 0=Slave */
#define SR_1000T_MS_CONFIG_FAULT  0x8000  /* Master/Slave config fault */
#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
#define SR_1000T_LOCAL_RX_STATUS_SHIFT  13

/* Extended Status Register */
#define IEEE_ESR_1000T_HD_CAPS 0x1000     /* 1000T HD capable */
#define IEEE_ESR_1000T_FD_CAPS 0x2000     /* 1000T FD capable */
#define IEEE_ESR_1000X_HD_CAPS 0x4000     /* 1000X HD capable */
#define IEEE_ESR_1000X_FD_CAPS 0x8000     /* 1000X FD capable */

#define PHY_TX_POLARITY_MASK   0x0100     /* register 10h bit 8 (polarity bit) */
#define PHY_TX_NORMAL_POLARITY 0    /* register 10h bit 8 (normal polarity) */

#define AUTO_POLARITY_DISABLE  0x0010     /* register 11h bit 4 */
                              /* (0=enable, 1=disable) */

/* M88E1000 PHY Specific Control Register */
#define M88E1000_PSCR_JABBER_DISABLE    0x0001  /* 1=Jabber Function disabled */
#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002  /* 1=Polarity Reversal enabled */
#define M88E1000_PSCR_SQE_TEST          0x0004  /* 1=SQE Test enabled */
#define M88E1000_PSCR_CLK125_DISABLE    0x0010  /* 1=CLK125 low,
                                     * 0=CLK125 toggling
                                     */
#define M88E1000_PSCR_MDI_MANUAL_MODE  0x0000   /* MDI Crossover Mode bits 6:5 */
                                     /* Manual MDI configuration */
#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020   /* Manual MDIX configuration */
#define M88E1000_PSCR_AUTO_X_1000T     0x0040   /* 1000BASE-T: Auto crossover,
                                     *  100BASE-TX/10BASE-T:
                                     *  MDI Mode
                                     */
#define M88E1000_PSCR_AUTO_X_MODE      0x0060   /* Auto crossover enabled
                                     * all speeds.
                                     */
#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
                              /* 1=Enable Extended 10BASE-T distance
                               * (Lower 10BASE-T RX Threshold)
                               * 0=Normal 10BASE-T RX Threshold */
#define M88E1000_PSCR_MII_5BIT_ENABLE      0x0100
                              /* 1=5-Bit interface in 100BASE-TX
                               * 0=MII interface in 100BASE-TX */
#define M88E1000_PSCR_SCRAMBLER_DISABLE    0x0200     /* 1=Scrambler disable */
#define M88E1000_PSCR_FORCE_LINK_GOOD      0x0400     /* 1=Force link good */
#define M88E1000_PSCR_ASSERT_CRS_ON_TX     0x0800     /* 1=Assert CRS on Transmit */

#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT    1
#define M88E1000_PSCR_AUTO_X_MODE_SHIFT          5
#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7

/* M88E1000 PHY Specific Status Register */
#define M88E1000_PSSR_JABBER             0x0001 /* 1=Jabber */
#define M88E1000_PSSR_REV_POLARITY       0x0002 /* 1=Polarity reversed */
#define M88E1000_PSSR_MDIX               0x0040 /* 1=MDIX; 0=MDI */
#define M88E1000_PSSR_CABLE_LENGTH       0x0380 /* 0=<50M;1=50-80M;2=80-110M;
                                       * 3=110-140M;4=>140M */
#define M88E1000_PSSR_LINK               0x0400 /* 1=Link up, 0=Link down */
#define M88E1000_PSSR_SPD_DPLX_RESOLVED  0x0800 /* 1=Speed & Duplex resolved */
#define M88E1000_PSSR_PAGE_RCVD          0x1000 /* 1=Page received */
#define M88E1000_PSSR_DPLX               0x2000 /* 1=Duplex 0=Half Duplex */
#define M88E1000_PSSR_SPEED              0xC000 /* Speed, bits 14:15 */
#define M88E1000_PSSR_10MBS              0x0000 /* 00=10Mbs */
#define M88E1000_PSSR_100MBS             0x4000 /* 01=100Mbs */
#define M88E1000_PSSR_1000MBS            0x8000 /* 10=1000Mbs */

#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
#define M88E1000_PSSR_MDIX_SHIFT         6
#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7

/* M88E1000 Extended PHY Specific Control Register */
#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000    /* 1=Fiber loopback */
#define M88E1000_EPSCR_DOWN_NO_IDLE   0x8000    /* 1=Lost lock detect enabled.
                                     * Will assert lost lock and bring
                                     * link down if idle not seen
                                     * within 1ms in 1000BASE-T
                                     */
/* Number of times we will attempt to autonegotiate before downshifting if we
 * are the master */
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X   0x0000
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X   0x0400
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X   0x0800
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X   0x0C00
/* Number of times we will attempt to autonegotiate before downshifting if we
 * are the slave */
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK  0x0300
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS   0x0000
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X    0x0100
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X    0x0200
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X    0x0300
#define M88E1000_EPSCR_TX_CLK_2_5     0x0060    /* 2.5 MHz TX_CLK */
#define M88E1000_EPSCR_TX_CLK_25      0x0070    /* 25  MHz TX_CLK */
#define M88E1000_EPSCR_TX_CLK_0       0x0000    /* NO  TX_CLK */

/* Bit definitions for valid PHY IDs. */
#define M88E1000_E_PHY_ID  0x01410C50
#define M88E1000_I_PHY_ID  0x01410C30
#define M88E1011_I_PHY_ID  0x01410C20
#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID

/* Miscellaneous PHY bit definitions. */
#define PHY_PREAMBLE        0xFFFFFFFF
#define PHY_SOF             0x01
#define PHY_OP_READ         0x02
#define PHY_OP_WRITE        0x01
#define PHY_TURNAROUND      0x02
#define PHY_PREAMBLE_SIZE   32
#define MII_CR_SPEED_1000   0x0040
#define MII_CR_SPEED_100    0x2000
#define MII_CR_SPEED_10     0x0000
#define E1000_PHY_ADDRESS   0x01
#define PHY_AUTO_NEG_TIME   45      /* 4.5 Seconds */
#define PHY_FORCE_TIME      20      /* 2.0 Seconds */
#define PHY_REVISION_MASK   0xFFFFFFF0
#define DEVICE_SPEED_MASK   0x00000300    /* Device Ctrl Reg Speed Mask */
#define REG4_SPEED_MASK     0x01E0
#define REG9_SPEED_MASK     0x0300
#define ADVERTISE_10_HALF   0x0001
#define ADVERTISE_10_FULL   0x0002
#define ADVERTISE_100_HALF  0x0004
#define ADVERTISE_100_FULL  0x0008
#define ADVERTISE_1000_HALF 0x0010
#define ADVERTISE_1000_FULL 0x0020
#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F  /* Everything but 1000-Half */

#endif                        /* _E1000_HW_H_ */

Generated by  Doxygen 1.6.0   Back to index